my SDHC always recognized as new Disc Drive - VS-Planet Forums

You are not logged in. [Log In] VS-Planet » Forums » Roland VS DAWs and Hardware » VS-880 / VX / EX / VS-890 / VSR-880 » my SDHC always recognized as new Disc Drive

Page 1 of 1

1

Topic Options

#1532344 - 05/30/17 04:31 PM my SDHC always recognized as new Disc Drive
YoyokHarness79 YoyokHarness79 Space Cadet Registered: 05/23/17 Posts: 7 Loc: Bali, Indonesia	Dear All Friend My name is Yoyok Harness, I Live in Bali Island, Indonesia. in couple of weeks i worked hard to make my VS 880 Live again. i replace the original HardDrive to SDHC card. i use TOSHIBA SDHC 4 Giga. the one that i can get in Indonesia and it got succesfull, i am happy, but after , every Power ON, system do scanning, my SDHC card always Recognizing as a New Drive, please Need Help thank you so much all Brother salam Edited by YoyokHarness79 (05/30/17 04:33 PM)
Top

#1532362 - 05/30/17 08:38 PM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
Dr. Altsack aka Volltreffer Dr. Altsack aka Volltreffer Planeteer Registered: 01/04/02 Posts: 1781 Loc: Munich, Germany	Do you remove the SD Card in between the boots of the vs and enter it into a PC? _________________________ Ciao, aXel ------------------ $\:D$ imply depressed $\:D$
Top

#1532394 - 05/30/17 11:54 PM Re: my SDHC always recognized as new Disc Drive [Re: Dr. Altsack aka Volltreffer]
YoyokHarness79 YoyokHarness79 Space Cadet Registered: 05/23/17 Posts: 7 Loc: Bali, Indonesia	no, i didnt ever,
Top

#1532396 - 05/31/17 12:15 AM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
YoyokHarness79 YoyokHarness79 Space Cadet Registered: 05/23/17 Posts: 7 Loc: Bali, Indonesia	it always say " SYS Init Drive : U? " after scanning Drive Edited by YoyokHarness79 (05/31/17 01:13 AM)
Top

#1532439 - 06/01/17 11:22 AM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
dkfackler dkfackler Planeteer Registered: 04/24/06 Posts: 706 Loc: Coventry, OH, planet Thulcandr...	Try a different brand SD card. For SD being a standard, there are some minor differences between brands. I have been successful with Kingston. You may need to try a different adapter, for the same reason. dk
Top

#1532446 - 06/01/17 12:37 PM Re: my SDHC always recognized as new Disc Drive [Re: dkfackler]
uptildawn uptildawn Planeteer Registered: 12/15/01 Posts: 9073 Loc: on land	I think it's far more likely to be the adapter than the card. At least that's where all our previous conversations about this have ended up... and there are many of these conversations spread across the 880, 1680 and 2480 forums. _________________________ uptildawn
Top

#1532585 - 06/02/17 02:41 AM Re: my SDHC always recognized as new Disc Drive [Re: uptildawn]
YoyokHarness79 YoyokHarness79 Space Cadet Registered: 05/23/17 Posts: 7 Loc: Bali, Indonesia	this the link that i bought the converter from http://m.ebay.com/itm/HI-SPEED-ADAPTER-C...6.c100408.m2460
Top

#1532586 - 06/02/17 02:43 AM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
YoyokHarness79 YoyokHarness79 Space Cadet Registered: 05/23/17 Posts: 7 Loc: Bali, Indonesia	or please suggest me, which converter should i buy again, Thanks Alot
Top

#1532598 - 06/02/17 04:51 AM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
uptildawn uptildawn Planeteer Registered: 12/15/01 Posts: 9073 Loc: on land	These adapters change components as often as the manufacturers run out or find cheaper alternatives. There's no way that I can recommend any SD adapter card today with any level of confidence. There's even bee a couple of times where people bought an adapter using the same link as that suggested as working and it turned out that they got an adapter that was similar but had changed slightly. We've never pinpointed exactly which component or components get changed that affect how a VS user can use it in a mod. The adapters evidently work fine in the normal computer world....... just not necessarily in VS land. You might try getting a CF card adapter - they were more reliable back when we were discussing them. That might have changed too by now, but it's probably worth a shot, since they're not terribly expensive. For a few dollars more, you can get an adapter that will hold an SD card in a CF-sized card that will go right in the CF adapter slot and that way you shouldn't need to spend more and change media in order to use CF cards instead of your SD card. This LOOKS very similar to the CF adapter I have - https://www.amazon.com/QNINE-Compact-Fla...+2.5%22+adapter and this is what the SD adapter looks like - https://www.amazon.com/Eye-Fi-Compact-Ad...cf+card+adapter it seems more expensive than what I remember, but it is very similar in looks to the adapter I was using. Maybe these will work.......... maybe they won't I can't help you with confirmation or guarantee in any fashion that they will, or even should anymore. _________________________ uptildawn
Top

#1532769 - 06/03/17 04:46 PM Re: my SDHC always recognized as new Disc Drive [Re: uptildawn]
YoyokHarness79 YoyokHarness79 Space Cadet Registered: 05/23/17 Posts: 7 Loc: Bali, Indonesia	thank you so much brother, feel more comfortable now
Top

#1532848 - 06/04/17 01:09 PM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
dkfackler dkfackler Planeteer Registered: 04/24/06 Posts: 706 Loc: Coventry, OH, planet Thulcandr...	I'll open my 880 and get you an adapter part number. dk
Top

#1533103 - 06/06/17 05:23 PM Re: my SDHC always recognized as new Disc Drive [Re: dkfackler]
dkfackler dkfackler Planeteer Registered: 04/24/06 Posts: 706 Loc: Coventry, OH, planet Thulcandr...	My adapter is a SYBA SD-ADA45006 https://www.newegg.com/Product/Product.aspx?Item=N82E16812186098 It has connections for two CF cards; I use only the Master and a CF-->SD adapter. Works just fine, and formatting survives the restart. ~dk
Top

#1538430 - 07/25/17 01:49 PM Re: my SDHC always recognized as new Disc Drive [Re: dkfackler]
YoyokHarness79 YoyokHarness79 Space Cadet Registered: 05/23/17 Posts: 7 Loc: Bali, Indonesia	Dear Friend. finnally my VS-880 work great succesfull with CF to IDE ATA converter . Also work Fine with CF Sandisk 8 Gb. it is a miracle
Top

#1538431 - 07/25/17 02:07 PM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
uptildawn uptildawn Planeteer Registered: 12/15/01 Posts: 9073 Loc: on land	Very glad to hear it's finally working! Would you mind sharing what you did to get it to work right? It could be really helpful to the community in the future. _________________________ uptildawn
Top

#1538943 - 07/28/17 12:14 PM Re: my SDHC always recognized as new Disc Drive [Re: YoyokHarness79]
dkfackler dkfackler Planeteer Registered: 04/24/06 Posts: 706 Loc: Coventry, OH, planet Thulcandr...	As it's working with CF, it will most likely work with SD as well. I'm told that CF and SD are identical data structures residing in different form factor enclosures. dk
Top

#1543998 - 09/03/17 10:55 AM Re: my SDHC always recognized as new Disc Drive [Re: dkfackler]
Dr. Altsack aka Volltreffer Dr. Altsack aka Volltreffer Planeteer Registered: 01/04/02 Posts: 1781 Loc: Munich, Germany	Nope, definitely not. _________________________ Ciao, aXel ------------------ $\:D$ imply depressed $\:D$
Top

#1547543 - 10/15/17 09:13 PM Re: my SDHC always recognized as new Disc Drive [Re: Dr. Altsack aka Volltreffer]
BPL BPL Space Cadet Registered: 10/13/17 Posts: 2	Thanks for this thread... I'm having this exact problem using an SD adapter.. looks a lot like the one mentioned here. So, I'd like to try the CF adapter.. Could some one walk me through this.. like I'm a child. Are these both possible options? SYBA SD-ADA45006 QNINE CF Card to 2.5" IDE Adapter (Also, just something I noticed, FWIW; when I put an SD disk in the SD adapter and initialise (which is every time), it creates 9 partitions regardless of the size of the SD disk (have only tried 16gb and 1gb disks). Given that (as I understand it) the VSR-880 creates partitions of either 512mb or 1 gb, this confuses me) I'm really keen to start using this unit again, so any help will be greatly appreciated.
Top

#1547559 - 10/15/17 11:02 PM Re: my SDHC always recognized as new Disc Drive [Re: BPL]
uptildawn uptildawn Planeteer Registered: 12/15/01 Posts: 9073 Loc: on land	If it matters to you any - this is the CF card adapter I bought in 2011 and still have today - https://www.amazon.com/gp/product/B004HPGTD6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 - it's very cheap, by the way. Don't know if the dual will work with the VS and I doubt that you would get anymore functionality from it. It looks like the QNINE you mention, but I couldn't say if they're the same as far as the VS is concerned. This is the Patriot 4GB CF card I bought and it works - https://www.amazon.com/gp/product/B002YGTS0Q/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 This is the Transcend 4GB SDHC card I bought back then and appears to not be available at least this linked one - https://www.amazon.com/gp/product/B001ECRZJM/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 the PNY card still available - https://www.amazon.com/gp/product/B000L7INLU/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 and the SD to CF card adapter I bought to use my SDHC cards in the CF to IDE adapter - MAYBE it could make it so your SD cards aren't always being forced to be reinitialized, since I believe it's the adapter that is the cause of the issue and not the card - https://www.amazon.com/Link-Depot-Digital-CompactFlash-LD-SD-CF/dp/B00B1AWVJ6 - don't know if there's a difference between type I and type II where these are concerned, or where the VS is concerned, but the one I have is type I. I always got the impression that newer technology didn't translate to improved compatibility with the VS, by the way. Hope this helps. AND I have no idea how you could get 9 partitions at all - let alone from a 1GB disk. The 880 will only give you 4 x 1GB partitions total... I'd suggest to always leave off physical format and scan when initializing - in other words, just a quick format is almost always necessary. Edited by uptildawn (10/15/17 11:03 PM) _________________________ uptildawn
Top

#1548045 - 10/19/17 07:48 PM Re: my SDHC always recognized as new Disc Drive [Re: uptildawn]
BPL BPL Space Cadet Registered: 10/13/17 Posts: 2	Thank you for this.. it helps quite a bit.
Top

Page 1 of 1

1

Previous Topic

Previous Topic View All Topics

View All Topics

Index Next Topic

Next Topic

Hop to:

Top Posters

75378

AL

55993

55396

43394

40001

37214

36529

33082

32942

31839

31446

29763

28813

NOK

27453

26865

26531

24317

RGR

24122

fabulousthunderbird

23691

21561

21125

20789

20154

19626

19598

Forum Stats

21370 Members
26 Forums
159767 Topics
1849787 Posts

Max Online: 386 @ 01/18/23 04:57 AM

Newest Members

AncientJuan, jairo santos, drshum, Selfish, VSDeadHead77
21370 Registered Users

Generated in 0.016 seconds in which 0.004 seconds were spent on a total of 14 queries. Zlib compression disabled.