Activating Vari Pitch
1. Press UTILITY.
2. If you don’t see “PlyRec” above F4, press PAGE until you do.
3. Press F4 (PlyRec).
Vari Pitch parameters
4. Turn VARI PITCH Sw on to activate the Vari Pitch feature—the VS-2480 takes a few moments to switch to Vari Speed operation.
VARI PITCH sets the project’s playing speed—its default value is the project’s sample rate. Higher values speed up playback, lower values slow it down.
5. Set the VARI PITCH parameter from 16.00kHz to 50.00kHz.
6. Press F6 (EXIT) to confirm your changes.
When Vari Pitch is turned on, a small V appears to the left of the current time in the VS-2480’s display.