Page 1 of 1 1
Topic Options
#1547077 - 10/11/17 02:04 PM Changing Zip Drives in vs840
DRSMITH Offline
Space Cadet


Registered: 10/11/17
Posts: 1
Hello,

I'm sorry if this topic has been discussed before, I did scan the posts but didn't see this specifically.

I'd like to change the zip drive in a VS840 from a 100 mb to 250 mb and I'm just curious if any 250 zip drive will work? Is there anything specific I need to look for? It appears the install is pretty straight forward. Thank you.

Top
#1552622 - 11/28/17 10:43 PM Re: Changing Zip Drives in vs840 [Re: DRSMITH]
Slabraton Offline
Planeteer


Registered: 12/16/12
Posts: 16566
Loc: California
I don't know your situation but I would avoid depending on Zip cartridges. I have found that with continued use, they will fail on you, usually when you are well into the project. The fragmented data cannot be restored or recovered. 100 MB is unusable and 250 MB is still absurd in 2017.

I do believe you can upgrade to a 250 MB Zip drive but I would advise you to not aspire to more than sketches on the very obsolete VS-840 and to use it as a mixer and record through it instead of to it. Take the digital output and record in Wav.

Top
#1552623 - 11/28/17 10:57 PM Re: Changing Zip Drives in vs840 [Re: Slabraton]
Wish Administrator Offline
🌴 VSP Moderator 🌵
Planeteer


Registered: 09/09/00
Posts: 11748
Loc: Phoenix, AZ
It needs to be a ATAPI Zip drive and you also need to make sure you have appropriate vs840 operating system update that supports the 250mb Zip drive....the early OS only supported the 100mb Zip drives if I remember correctly. You will need the VS840EX version of the software.

I couldn't tell you offhand which OS version supports the 250mb zip other than it needs to be EX.


Edited by Wish (11/28/17 11:16 PM)

Top
#1553771 - 12/08/17 11:57 AM Re: Changing Zip Drives in vs840 [Re: Wish]
jimmyrock Offline
Department Head of Redundancy Department Head
Planeteer


Registered: 12/18/05
Posts: 9684
Loc: America's File Cabinet
if you're up to trying ....the cf card install is also starightforward and has benefits over zips....
Top
#1553774 - 12/08/17 01:29 PM Re: Changing Zip Drives in vs840 [Re: jimmyrock]
dkfackler Offline
Planeteer


Registered: 04/24/06
Posts: 706
Loc: Coventry, OH, planet Thulcandr...
 Originally Posted By: jimmyrock
if you're up to trying ....the cf card install is also straightforward and has benefits over zips....


No "click of death"...

Top
Page 1 of 1 1


Hop to:
Top Posters
75373
AL
55982
Ismellelephant
55396
Jazzooo
43394
Timster
40001
Silversmith
37214
Mooseboy
36529
C Jo Go
33082
Popmann
32942
Tom Mix
31836
moontan
31445
gonzo
29763
flatcat
28813
NOK
27453
Memphis Monroe
26863
Doughboy
26531
Marty Gilman
24317
RGR
24122
fabulousthunderbird
23691
paulb
21559
Vanillagrits
21125
fonts
20782
MadGuitrst
20154
ulank
19626
glensimonds
19598
vvvm
Forum Stats
21370 Members
26 Forums
159765 Topics
1849750 Posts

Max Online: 386 @ 01/18/23 04:57 AM
Newest Members
AncientJuan, jairo santos, drshum, Selfish, VSDeadHead77
21370 Registered Users

Generated in 0.013 seconds in which 0.002 seconds were spent on a total of 13 queries. Zlib compression disabled.