Bussing individual stems out of 1680 for processing - VS-Planet Forums

You are not logged in. [Log In] VS-Planet » Forums » Roland VS DAWs and Hardware » VS-1680 / 1880 / 1824 » Bussing individual stems out of 1680 for processing

Page 1 of 1

1

Topic Options

#1559959 - 01/30/18 12:59 AM Bussing individual stems out of 1680 for processing
RD RD Planeteer Registered: 07/29/02 Posts: 1396 Loc: Michigan, someplace near a swa...	I'm not at my studio just now, but I want to route stems and some individual tracks out for processing (in house) and import them back into the 1680 in real time. Probably using La2a or something similar...This way I can rent it for a short time during the mixing phase. Curious: What is the best routing option, and has anybody had good success with this idea? Your thoughts will be appreciated! Edited by RD (01/30/18 01:05 AM) _________________________ Using my original VS 1680 27 years now and counting!
Top

#1559976 - 01/30/18 03:51 AM Re: Bussing individual stems out of 1680 for processing [Re: RD]
uptildawn uptildawn Planeteer Registered: 12/15/01 Posts: 9073 Loc: on land	routing of individual tracks and groups of tracks on the 1680 is pretty darn limited...... but maybe you can make use of the direct outs for individual tracks - direct out bypasses the mixer completely - no fx, no processing........ just dry tracks. But you can pass up to 8 tracks at a time that way. You hook up rca cables to every pair of rca jacks on the rear of the unit for this.... not that you have to use all at once. It routes the first 8 channels in one bank and 9-16 in the other bank........ can't mix say 5,6,7,8,9,10 in one pass, for instance. You can use AUX outs to derive a separate set and mix of track combinations than the main outs, which would let you do at least two submixes at one time... maybe three?.... you'll have to read up on how many separate mixes you can get with this combo - 2 or 3 I'm pretty sure.... You would set up the AUX out tracks with their main channel faders turned down, so as not to send them to the mains at the same time. It's been ages since I did any of this on the VS, so sorry to be vague. Maybe somebody will pop in with better details. _________________________ uptildawn
Top

#1560006 - 01/30/18 01:23 PM Re: Bussing individual stems out of 1680 for processing [Re: uptildawn]
RD RD Planeteer Registered: 07/29/02 Posts: 1396 Loc: Michigan, someplace near a swa...	Thanks, really appreciate your input!...It seems possible...What I want to do is paint with some expensive hardware after recording the track or sub mixes...I'm off to the plain brown manual. :-) RD _________________________ Using my original VS 1680 27 years now and counting!
Top

Page 1 of 1

1

Previous Topic

Previous Topic View All Topics

View All Topics

Index Next Topic

Next Topic

Hop to:

Top Posters

75353

AL

55963

55387

43389

40001

37209

36521

33081

32942

31836

31440

29758

28813

NOK

27447

26863

26524

24317

RGR

24116

fabulousthunderbird

23691

21556

21125

20765

20149

19624

19598

Forum Stats

21370 Members
26 Forums
159740 Topics
1849556 Posts

Max Online: 386 @ 01/18/23 04:57 AM

Newest Members

AncientJuan, jairo santos, drshum, Selfish, VSDeadHead77
21370 Registered Users

Generated in 0.031 seconds in which 0.002 seconds were spent on a total of 14 queries. Zlib compression disabled.