I just finished a recording session. I learned something about the VS2480 since I had never tried what I am about to state to you all, before.
In the past I have digitally connected my VS2480 to a VS2000 through SPDIF and it worked great. If I disconnected the main VS2480 that was digital out and then played the track on the VS2000 it was fine.
Tonight, I tried this with my two VS2480s. I find that I have to keep both units on for the track that was recorded to play properly. When unit 2 (with the recorded material) is digitally unlocked (thus running on internal time) it is now in the wrong pitch. In one case it was sped up.
Mind you the tempo map was the same on both units. THe only difference was that unit one had music recorded at 16bit 44.1 khz(digital out unit). Unit 2 (the digital in unit) is set at 24bit 48khz.
To make it sound right I had to turn on Unit 1 and make sure the digital clock in Unit 2 was locked in. Then the tracks would play correctly.
Will I always have to do this? Or is there a way to make unit 2 have the time correct?
Just when I thought I knew almost everything about the VS2480.
Edited by I_CaneFire (02/11/18 07:24 AM)