for a long time I have not used my SCSI CD R drive for my vs 1680. It's a QPC/HP 9200 or so SCSI drive.
I plugged it into the VS, ID set to 5 or 6 (VS is 7). When starting up the VS it takes a little longer to scan the drives (I believe that was always the case). The CD-R is shown in the menus, however, I cannot select it. it's just shown with the ID and the name (HP something). Inside the CD R I tried an empty (not formatted) CD R and a standard audio CD.
When I want to start any CD action (eg CD R Backup) the VS immediately returns "no cd-r drive", no visible reaction on the CD R. However, during the drive scan I hear that the fan or disk starts running.
I should note that the terminator (passive) on the CD-R side is brand new, bought it from ebay from someone who had never used it.
Any idea is highly appreciated!
Edited by degerfeldt (01/24/19 04:13 PM)