Page 1 of 1 1
Topic Options
#1681209 - 09/18/20 02:32 PM VS-880 EX repair
DCore Offline
Planeteer


Registered: 03/02/20
Posts: 39
Loc: Washington State
I am working on a VS-880EX. The volume pots feel like they have sand or gravel inside them. Expecting the worst, I ordered replacement pots and disassembled the unit. These are the worst pot guts I have ever seen. Out of 9 pots only 4 passed the internal diagnostic program. I will remove, disassemble, clean, inspect and rebuild/reuse the originals as possible. Have a look...




https://imgur.com/a/iB4wfok

Top
#1681229 - 09/18/20 04:49 PM Re: VS-880 EX repair [Re: DCore]
martinsavoie Offline
Space Cadet


Registered: 04/10/20
Posts: 23
great work thanks for sharing
Top
#1681390 - 09/19/20 06:15 PM Re: VS-880 EX repair [Re: martinsavoie]
DCore Offline
Planeteer


Registered: 03/02/20
Posts: 39
Loc: Washington State
I cleaned the pot pieces and temporarily reassembled them to see if I could salvage a few of them. I got fairly good readings from 4 out of 9 units. I previously ordered 8 of the new pots from Mouser (don't ask "why 8?") and I think I will choose the best of the leftovers to use for the master volume. Even though there were a couple more sliders that seemed to be intact, I guess the carbon tracks were obliterated by the constant grinding action. The new pots have a taller lever but I think I will use them as is and not attempt to grind or cut off the excess height. I can visualize causing all sorts of problems for myself.
Top
#1681550 - 09/21/20 02:58 AM Re: VS-880 EX repair [Re: DCore]
martinsavoie Offline
Space Cadet


Registered: 04/10/20
Posts: 23
way to go DCore
Top
#1681586 - 09/21/20 12:01 PM Re: VS-880 EX repair [Re: martinsavoie]
dkfackler Offline
Planeteer


Registered: 04/24/06
Posts: 573
Loc: Coventry, OH, planet Thulcandr...
Those 'levers' can be cut easily with diagonal cutters.

I've replaced them in a VS880 and Tascam US-428

dk

Top
#1681627 - 09/21/20 05:14 PM Re: VS-880 EX repair [Re: dkfackler]
DCore Offline
Planeteer


Registered: 03/02/20
Posts: 39
Loc: Washington State
Well, 72 soldering points later (8 points per fader x 9 faders), the beast is up and running. I reinstalled all the boards and parts and ran the diagnostic program and all the faders now work. On closer inspection this unit appears to have been drop kicked a few times. The corners of the case are split and a couple of the internal standoffs were broken loose. Everything went back together smoothly and I have recorded some test tracks just to make sure. If I get tired of looking at the goofy height of these replacement pot levers, I will attempt to use diagonal cutters and shorten them to a more reasonable height. The cost of parts was less than $30. Don't ask about how long it took me...I did not want to hurry through the repair and regret my haste and inattention to detail.
Top
#1681661 - 09/21/20 10:51 PM Re: VS-880 EX repair [Re: DCore]
LarryG Offline
Planeteer


Registered: 02/04/00
Posts: 2168
Loc: SW Florida
Youíre a talented guy, D!
Jealous of your handiwork skills.
_________________________
/L

Top
#1681686 - 09/22/20 08:40 AM Re: VS-880 EX repair [Re: LarryG]
DCore Offline
Planeteer


Registered: 03/02/20
Posts: 39
Loc: Washington State
It gives a great satisfaction to keep older technology from going to the landfill before its time. The documentation from this site and Roland makes it possible to search out part substitutions. The members of this forum are invaluable for finding ways to keep their devices running. This 880EX is very logically laid out and if one keeps the screws and hardware securely stored with the subassemblies which they secure, then reassembly after repair is much easier. As I previously mentioned I am not by nature a detail-oriented person. But tasks like this force me to be diligent about research and organization and to visualize a successful teardown and reassembly. In doing this sort of work, I learn as much about myself as I learn about the machine. Thank you all for your help!
Oh, BTW I did take your suggestion and trim the lever heights using a pair of diagonal cutters..worked like a charm! Thanks again for the tip!

Top
#1681812 - 09/23/20 07:57 AM Re: VS-880 EX repair [Re: DCore]
dkfackler Offline
Planeteer


Registered: 04/24/06
Posts: 573
Loc: Coventry, OH, planet Thulcandr...
 Originally Posted By: DCore

Oh, BTW I did take your suggestion and trim the lever heights using a pair of diagonal cutters..worked like a charm! Thanks again for the tip!


Welcome.

dk

Top
#1691945 - 11/16/20 02:41 PM Re: VS-880 EX repair [Re: dkfackler]
GJtalks Offline
Space Cadet


Registered: 11/15/20
Posts: 2
This question is for a friend who is blind and is programming a small station in Palatka, FL. His VS880 - he says it is the original one built around 1997 or 98 - needs to be repaired. He is adamant that he wants to keep this particular machine and get it working again. Can anyone recommend a place he could send it for repairs? Thank you!
Top
#1691950 - 11/16/20 03:16 PM Re: VS-880 EX repair [Re: GJtalks]
dkfackler Offline
Planeteer


Registered: 04/24/06
Posts: 573
Loc: Coventry, OH, planet Thulcandr...
What is wrong with it?

~dk

Top
#1691953 - 11/16/20 03:32 PM Re: VS-880 EX repair [Re: dkfackler]
Wish Administrator Offline
🌴 VSP Moderator 🌵
Planeteer


Registered: 09/09/00
Posts: 8611
Loc: Phoenix, AZ
Probably cheaper to just buy a working one off of eBay, and swap the hard drive over. I am not sure you will be able to find anyone who repairs these.
_________________________
Q: Is it good music?
A: I Wish Art

Top
#1691973 - 11/16/20 04:55 PM Re: VS-880 EX repair [Re: Wish]
GJtalks Offline
Space Cadet


Registered: 11/15/20
Posts: 2
He is sending me more info about whatís wrong with it. Heís hoping to keep it since itís been so useful for him, but he understands he may have to bid it farewell. Iíll send details ASAP. Thank you!
Top
#1692013 - 11/16/20 10:43 PM Re: VS-880 EX repair [Re: GJtalks]
LarryG Offline
Planeteer


Registered: 02/04/00
Posts: 2168
Loc: SW Florida
Hey, DCore.

What youíve done here is most impressive. That machine looks like it was beat up, abused and neglected. You deserve to be very proud of all the work you put into it. Itís amazing to hear that you were able to put it all back together and make it functional again.

How you approached this challenge and personally adapted yourself to succeed is also admirable.

Thanks for posting.
_________________________
/L

Top
#1692696 - 11/20/20 12:28 PM Re: VS-880 EX repair [Re: LarryG]
DCore Offline
Planeteer


Registered: 03/02/20
Posts: 39
Loc: Washington State
Thanks much...here's to keeping them running!


Edited by DCore (11/20/20 12:29 PM)
Edit Reason: misspelling

Top
Page 1 of 1 1


Hop to:
Shout Box

Who's Online
2 registered (SkyWave, The Vampire Lestat) and 7 anonymous users online.
Top Posters
53071
Jazzooo
48393
Al
40367
Timster
40001
Silversmith
37359
Ismellelephant
32942
Tom Mix
31121
Mooseboy
29935
Popmann
29890
gonzo
28773
NOK
28706
moontan
28701
C Jo Go
26613
flatcat
26541
Doughboy
24298
Marty Gilman
23691
paulb
23376
RGR
21705
Gretsch 6120
21692
fabulousthunderbird
21125
fonts
19798
Vanillagrits
19598
vvvm
19466
String Jammer
19436
glensimonds
18923
T57Strat
18894
GAMBLE
18791
Jammer
18182
SteveW
17935
JazAddict
17600
GAWZDigitalUnderground
17522
Geo
17300
Hano
16905
Dave Morris
16566
Slabraton
16448
Liquidirt
16212
slotz
16175
Delso
16112
Milkman
16077
ulank
Forum Stats
21240 Members
25 Forums
144831 Topics
1671375 Posts

Max Online: 290 @ 11/19/19 07:32 PM
Newest Members
Mud303, dzintarsat, Sergiob, BEVS, sfehn
21240 Registered Users

Generated in 0.025 seconds in which 0.015 seconds were spent on a total of 13 queries. Zlib compression disabled.