|
Hey people, I just purchased a r-bus cable from Ebay and do not seem to be able to get audio from my mv8800 to the vs.I dont know if anyone here is familiar with the mv. I have the cable in my rbus1. I have the routing set from the first 8 tracks to the rbus section. On the mv I have a kick drum set to mlt 1. Back to the vs, when I got to project parameter in utility and select rbus 1 under master clock the check mark just goes back to internal when I try to select rbus. If I go to the rbus section under utility and turn remote control on it says unconnected. I cant think of any other areas I could be missing . I have the drum track on a loop and have not been able to see a signal input in the rbus section of the mixer. If anyone one has any idea if I'm doing something wrong could they please let me know . Starting to think this wasnt an rbus cable I bought.
| 
