Page 9 of 9 « First<56789
Topic Options
#1521585 - 02/28/17 01:22 PM Re: VS WaveExport Instructions [Re: Dr. Altsack aka Volltreffer]
Dr. Altsack aka Volltreffer Offline
Planeteer


Registered: 01/04/02
Posts: 1778
Loc: Munich, Germany
...and btw the sample rate error is REALLY unlikely, as I created and read the old files with soundbooth before. (And there were also stereo WAVs...)

It might as well be the luck of having some 2^n length of samples or so - but I don't care too much, as it worked out nice. I MIGHT try to use different MasterTrack than 23/24 - maybe they are strange in MTP/88,1 ... I'll go and verify the CDs - it might have been an error with them, too... I'm gonna keep the ripped files for a while, if the SW authors wanna use them for trying out, it might be helpful, and I could place the stuff on dropbox for transfer.
_________________________
Ciao,

aXel
------------------
\:D imply depressed \:D

Top
#1523954 - 03/20/17 06:14 AM Re: VS WaveExport Instructions [Re: shanabit]
Jacksn Offline
Space Cadet


Registered: 08/19/12
Posts: 17
Loc: GA, USA
Good morning. I would have thought I understood by now how to recover the "Whole" project of, MULTIPLE CD BACKUPS from my live rehearsals of our band via VS WaveExport- But seems, I still can't figure it out.
e.g.: We record over an hour and a half of MTP/24bit 6 track material which requires at least 2 CD-Rs to backup. I take those home and try to extract them via the VS WaveExport s/w, but still just don't understand exactly how to do a multi-CD extraction and have all the files from all CDs converted together into WAVs. I always have a problem in REAPER having all the material. This includes me with experimentation of cutting files into other folders, etc. etc. with no success.
Can someone please explain step by step the proper way to RECOVER a MULTI-CD Backup of RDAC from my VS-2400CD thru the VS WaveExport s/w? I have read the excellent PDF instructional (and downloaded it), but still can not get my head wrapped around multi-cd recovery. Some help on this from a "VS WaveExport for Dummies" perspective would be GREATLY appreciated. Thanks guys!

Top
#1523967 - 03/20/17 10:53 AM Re: VS WaveExport Instructions [Re: Jacksn]
uptildawn Online   content
Planeteer


Registered: 12/15/01
Posts: 7787
Loc: Iowa
Bear, the developer of the CD ripper had said this in an earlier post on pg 5 of this thread:
 Originally Posted By: bear
I have never tried a project that was so big it spanned two dvd... that is one large project -

In general - I have never had good luck ripping projects that span multiple discs from the shell out of VSWE - it has only worked for me from the command line direct execution of the ripper - Always rip the discs in order, and from the same file folder - if it works properly it will create the song folder from the first disc, and then add the additional take files from the second in the same folder.

...


This applies to CDs as well as DVDs and I can verify that multiple disc backups are problematic and should be avoided.
If you've followed bear's advice (above) and it isn't working for you, then maybe it's time to stop creating multi-disc sessions.

These are band rehearsals - It shouldn't be terribly difficult to learn to keep an eye on the machine and take a short break to stop and change to a new project (or figure out how long you can practice before you need to stop the machine). Instead of multi-cd spans of a single project/session, you'd be creating separate cds that contain only as much as can be put on one disc and avoid the issues. I'd avoid filling a disc completely to the brim, too. I'm pretty sure that doing so caused me issues when ripping in the past.

Also, if following bear's instructions isn't working, why not reimport those multi-disc sessions back to your VS and then chop the size of the long single session into multiple shorter sessions that can be backed up to single discs.

Frank and I have both posted instructions on the two methods I know of to break a single session up. You can find those instructions in this thread, if you sift through the posts. Basically, either use Song Split, along with the advice/strategy I've posted, or use the Song Copy method that Frank posted. Both methods can work really well, but you will want to start with plenty of free hard drive space - maybe backup anything current that needs to be saved to a disc, or discs first, so you can free up the hard drive and then reimport one of those long sessions and learn how to split it up.

Hope this helps. It's not exactly what you asked for, but it will save you a lot of grief in the future for sure.
_________________________
uptildawn

2013 Iowa City JazzFest sets!
Dr Lonnie Smith Trio w/Jonathan Kreisberg on guitar
Pharoah Sanders Quartet
Fred Hersch Trio
These are post mixes set to single camera video (by Rich Rauch).

Top
#1531509 - 05/22/17 01:48 PM Re: VS WaveExport Instructions [Re: uptildawn]
mike gouthro Offline
Planeteer


Registered: 04/20/99
Posts: 3797
Loc: toronto,ontario,canada
In case this thread get read more frequently than the 1680 thread, I'm duplicating my post here as well:

Back in 2010 I used Bear's Reaper/Ripper tool on a 1680 backup disc and created a folder with a SONG.VR6 file along with multiple TAKE files.

I also downloaded the VS plugin: "reaper_vs.dll" and was then able to use Reaper to work on the 1680 songs.

I still have the SONG.VR6 folder and I want to do more work.

Because I replaced my PC a couple of years ago, I no longer have the "reaper_vs.dll" plugin.

Toady I tried to reacquire reaper_vs.dll from:

http://www.ps139.com/vs880ex/util

I got a red screen message "This site ahead contains harmful programs" etc

Is this site really dangerous? If so, where can I safely acquire reaper_vs.dll?

Thanks...........Mike

Top
#1541049 - 08/08/17 09:49 PM Re: VS WaveExport Instructions [Re: mike gouthro]
randygo Offline
Planeteer


Registered: 10/11/06
Posts: 330
Loc: Washington
FYI, I cracked Roland's mangled FAT16 layout. Info on this thread:

http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=1540857#Post1540857

Cheers,

Randy


Edited by randygo (08/08/17 09:49 PM)

Top
#1545270 - 09/21/17 06:19 PM Re: VS WaveExport Instructions [Re: randygo]
mobofsquirrels Offline
Planeteer


Registered: 09/23/10
Posts: 71
Nevermind, I found the answer!

Edited by mobofsquirrels (09/25/17 05:58 PM)

Top
#1546846 - 10/08/17 04:51 PM Re: VS WaveExport Instructions [Re: shanabit]
Monkeyfingers Offline
Planeteer


Registered: 11/22/02
Posts: 45
Loc: St. Charles, Illinois
Hey guys,
First of all, I hope everyone is safe and doing well.
Are Windows 10 and Reaper/VS Wave EXport/.BAT not compatible? I can get the back-up to cd from the 2480, run it on the pc in DOS with the cd2roland file, get the congratulations on the file xfer, etc., but that is where I'm now having no success opening my song.
BTW, my old songs on Reaper are all missing dozens of files and will not play any tracks.
So, anyone have any suggestions? Also, what about listening to fellow planeteers songs anymore? Does anyone do that? Thanks.
_________________________
"Don't die with your music still in you."
"Sleep is for losers."

Top
#1564587 - 03/04/18 01:06 PM Re: VS WaveExport Instructions [Re: Zed Leppelin]
PAZZA Offline
Space Cadet


Registered: 07/05/06
Posts: 10
Loc: UK
To Jazzbassnick,
I found this thread by Frank posted some time ago; might be helpful for many Planeteers.


I link the master tracks in the track 23/24 channel edit pages and they usually come out stereo .wav,
I have a FREE manual with step by step on this.
Email me at Fcgjabq@aol.com

Here's a portion on this...

EXPORTING MASTER TRACKS
When you get to the V-Track map in the TRACK EXPORT window, you’ll have to scroll thru all the tracks and their V-tracks to get to track 23, check mark its V-track you mastered to then scroll to track 24 and check mark its same V-track you mastered to.

Even though you have to check mark both the left and right mono tracks in the track export window, the VS will still combine them into one STEREO PAIR in to a single stereo file as long as you have them LINKED. Bring them forward in the HOME screen, selecting the V-Tracks on the V-track map and then link them on track 23’s CH-Edit page. If you do not LINK them before exporting master tracks they will wind up being MONO left and right files.

Also, if you export mastered tracks, the CD-R Mode 16bit pairs will be exported as stereo .wav files but with the non-CD-R mode mastered tracks in 24bit, if you do not have them linked and check mark the L & R tracks to be exported, they will turn out to be MONO .wav files. If you want STEREO .wav files, be sure to link them and check both left & right to be exported at the same time.

It can be tricky but you can export STEREO .wav format mastered tracks in 24bit. They will come out with a file name similar to this: 2316V_T23_16.WAV. Notice, track 24 is not in the title, weird but OK. Once done linking the tracks and exporting them, don’t forget to go back and select empty V-tracks or the original V-tracks that were in the HOME screen. The stereo .wav files are 24bit so some apps that only play 16bit audio will not open them ie Window’s Media Player!
Hope this helps
Frank
_________________________
"MORE GUITARS"
VS2480DVD,3-VS8F-2/1-VS8F-3 & 5 plugins+Auto-Tune,MassHiRes EQ,UA Bundle,Chrometone,Soundblender/TC Reverb,T-Racks.Dyns BM5A's,Roland DS50A's,M-Audio 2.1,PreSonus TubePre w/Rode NT1000,SM57&58,MXL V57&V67,B-5,XV5050,Yamaha P200,Oxygen8 V2,Behring V-amps,SansAmp DI, Taylor,Gibsons,Fender,Ric,Washburn Bass.2 RPC-1's,PC Sonar 4, Acid 5, Wavelab etc.

Top
#1567246 - 03/25/18 03:55 PM Re: VS WaveExport Instructions [Re: PAZZA]
Doolang Offline
Planeteer


Registered: 10/15/04
Posts: 31
Loc: Moncton
Anyone have any luck with VS WaveExport and Windows 10? do Franks instructions still apply?
Top
#1567249 - 03/25/18 04:26 PM Re: VS WaveExport Instructions [Re: Doolang]
powermac Offline
Planeteer


Registered: 02/21/16
Posts: 175
I would like to know the same thing. Have Windows 10 and would like to create some .wav files and export to Reaper.
Top
#1567364 - 03/26/18 01:06 PM Re: VS WaveExport Instructions [Re: powermac]
mobofsquirrels Offline
Planeteer


Registered: 09/23/10
Posts: 71
VSWE worked fine on my windows 10 system.
Top
Page 9 of 9 « First<56789


Hop to:
Shout Box

Who's Online
4 registered (Infinitymobile, DEMONMASTER62, 2 invisible) and 129 anonymous users online.
Top Posters
49466
Jazzooo
43828
Al
40001
Silversmith
38356
Timster
32942
Tom Mix
28717
NOK
27149
Popmann
27120
gonzo
26732
Ismellelephant
25757
Doughboy
25222
Mooseboy
25017
moontan
23691
paulb
23606
flatcat
23083
RGR
22052
Marty Gilman
21514
C Jo Go
21125
fonts
20140
Gretsch 6120
19813
fabulousthunderbird
19598
vvvm
19386
String Jammer
19008
glensimonds
18938
Vanillagrits
18923
T57Strat
18894
GAMBLE
18791
Jammer
17765
SteveW
17600
GAWZDigitalUnderground
17522
Geo
17271
Hano
16501
JazAddict
16175
Delso
15818
LakeStone Karl
15237
Liquidirt
15039
Dave Morris
14958
virtualan
14908
kid-surf
14850
Dan Barnes
Forum Stats
20738 Members
30 Forums
133391 Topics
1536034 Posts

Max Online: 226 @ 03/21/16 07:30 AM
Newest Members
Coda123, DanBailiff, Nordlaw75, StoSoStu, Lee1
20738 Registered Users

Generated in 0.032 seconds in which 0.026 seconds were spent on a total of 13 queries. Zlib compression disabled.