Page 1 of 1 1
Topic Options
#1503747 - 11/17/16 10:21 AM VM 3100 Mixer midi
rotallicso Offline
Space Cadet


Registered: 11/17/16
Posts: 2
I have the Pro version but i believe it should be the same with the regular one

How does the test mode for MIDI i/o work ?

You power up holding 4 & 7 then scroll down to MIDI Test then i/o

I can see midi coming in

I see no activity nor know what to do to test midi output (thru works fine, when enabled)

Even re-installing the OS and setting the Out/Thru port to Out results in no midi output (including dumps)

Yet the port will play fine for input > thru

what can i test, there's no opto on the output side so wondering why the midi may be compromised - i've set every option for faders and transport and tried different bulk dumps

anyone got one who can confirm a simple test that i can use to prove/disprove an issue before i approach Roland

Top
#1503755 - 11/17/16 02:43 PM Re: VM 3100 Mixer midi [Re: rotallicso]
rotallicso Offline
Space Cadet


Registered: 11/17/16
Posts: 2
Admin: Please mark as Resolved

This was no noob error - this was an obscure setting that needed switching from default

.....

i've now bottomed this out it was as follows

R-BUS Target Must be switched from the default setting of RPC-1
It should be set to DIF/VSR to facilitate MIDI out !

I'm not sure there's much wisdom in my being a member going forward, although i do intend to make an editor for this. at any rate please keep this comment up in some form to help anyone else stuck on this one thanks

cheers

Top
Page 1 of 1 1


Hop to:
Newest Members
raultv, Bgdlive59, AncientJuan, jairo santos, drshum
21372 Registered Users

Generated in 0.025 seconds in which 0.002 seconds were spent on a total of 13 queries. Zlib compression disabled.