Page 1 of 1 1
Topic Options
#1721577 - 03/17/21 08:50 PM Upgrade to Win 10 64 VirDIS not working
Steve Phillips Offline
Planeteer


Registered: 11/04/99
Posts: 405
Loc: Smiths Falls, Ontario, Canada
I upgraded my studio machine from Win 10 32 to Win 10 64.

The VirDIS driver is installed and the software runs. The 2480 sees it. But when I try to access the drive I get Operation Failed!

Any insight?

TIA
_________________________
Steve

Top
#1721579 - 03/17/21 08:55 PM Re: Upgrade to Win 10 64 VirDIS not working [Re: Steve Phillips]
Steve Phillips Offline
Planeteer


Registered: 11/04/99
Posts: 405
Loc: Smiths Falls, Ontario, Canada
I can see the drive in the drive list but when I try to do a list on the drive I get Operation Failed!

VirDIS shows that the 2480 has LOADED the disk. But I do not see any read or write operations.
_________________________
Steve

Top
#1721580 - 03/17/21 08:56 PM Re: Upgrade to Win 10 64 VirDIS not working [Re: Steve Phillips]
Steve Phillips Offline
Planeteer


Registered: 11/04/99
Posts: 405
Loc: Smiths Falls, Ontario, Canada
Actually I do see a RD when I list the drives from the 2480. But nothing after that.
_________________________
Steve

Top
#1721652 - 03/18/21 01:44 AM Re: Upgrade to Win 10 64 VirDIS not working [Re: Steve Phillips]
VirDISDeveloper Offline
VirDIS® author
Planeteer


Registered: 12/28/05
Posts: 64
Loc: Galveston, Texas, USA
Steve - did you reinstall the VirDIS driver using the 64-bit folder as the source vs. the 32-bit? Try disabling the current driver and reinstalling from the 32-bit folder. If that doesn't work contact me directly: virdis@virtualscsi.com.
_________________________
- VirDIS® author

Top
#1721664 - 03/18/21 02:19 AM Re: Upgrade to Win 10 64 VirDIS not working [Re: VirDISDeveloper]
Steve Phillips Offline
Planeteer


Registered: 11/04/99
Posts: 405
Loc: Smiths Falls, Ontario, Canada
I was sure I did but I disabled and reinstalled anyways and it's the same.
_________________________
Steve

Top
#1721666 - 03/18/21 02:19 AM Re: Upgrade to Win 10 64 VirDIS not working [Re: VirDISDeveloper]
Steve Phillips Offline
Planeteer


Registered: 11/04/99
Posts: 405
Loc: Smiths Falls, Ontario, Canada
Wait...you said to reinstall from the 32 bit driver? OK I will try that too.
_________________________
Steve

Top
#1721667 - 03/18/21 02:22 AM Re: Upgrade to Win 10 64 VirDIS not working [Re: Steve Phillips]
Steve Phillips Offline
Planeteer


Registered: 11/04/99
Posts: 405
Loc: Smiths Falls, Ontario, Canada
OK I tried the 32 bit driver and the behaviour is the same.

I installed Windows 10 64 on a new HD. I have the VirDIS files on a second data drive. So it was a clean install of 4.3.6871 which is the latest I have.
_________________________
Steve

Top
#1721847 - 03/18/21 11:34 PM Re: Upgrade to Win 10 64 VirDIS not working [Re: Steve Phillips]
Steve Phillips Offline
Planeteer


Registered: 11/04/99
Posts: 405
Loc: Smiths Falls, Ontario, Canada
At Bill's suggestion I checked the cables/connectors. It seems that there was an issue with the connection on the 2480 side. I re-seated it and sprayed it with Deoxit and it's working now.

Thanks Bill!
_________________________
Steve

Top
Page 1 of 1 1


Hop to:
Newest Members
raultv, Bgdlive59, AncientJuan, jairo santos, drshum
21372 Registered Users

Generated in 0.015 seconds in which 0.003 seconds were spent on a total of 13 queries. Zlib compression disabled.