Page 1 of 1 1
Topic Options
#1745414 - 08/13/21 10:58 PM behringer motorized faders, replacement fader for the vs2400cd?
digital reverb Offline
Space Cadet


Registered: 08/13/21
Posts: 4
will these behringer motorized faders work as a replacement to the faders in my vs2400cd?

"Behringer Motor Motor-Fader MF60T"

they are 60 mm
10k
and linear(digital)
https://www.sweetwater.com/store/detail/...tor-controllers


http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=1738378


the behringer faders doesnt say how many volts, the original faders are 5 volts?

https://www.thomann.de/se/behringer_motoer_motor_fader_mf60.htm


Thanks

Top
#1745517 - 08/14/21 07:47 PM Re: behringer motorized faders, replacement fader for the vs2400cd? [Re: digital reverb]
gyorpb Offline
Planeteer


Registered: 05/11/19
Posts: 298
They are 99%* certain not going to fit the VS fader board.

* I‘m actually fully certain, but too lazy to investigate and check against the service manual.

Top
#1745520 - 08/14/21 08:27 PM Re: behringer motorized faders, replacement fader for the vs2400cd? [Re: gyorpb]
digital reverb Offline
Space Cadet


Registered: 08/13/21
Posts: 4
Thanks gyorpb,

ok I see. \:\(

the technic info is almost right except for not mentioning the volts.

too bad.

Got the faders on channel 1-2 and 7 and 8 not returning into the right place( only going half the way before stopping) when swithing fader mode.

cant find nothing on ebay, or any stores around here,

are there any faders at all that fits the dimensions and in right kohm and volts?

Top
#1745565 - 08/15/21 06:00 AM Re: behringer motorized faders, replacement fader for the vs2400cd? [Re: digital reverb]
gyorpb Offline
Planeteer


Registered: 05/11/19
Posts: 298
Not to my knowledge, making fader replacement a serious hack.
Top
#1745655 - 08/15/21 10:02 PM Re: behringer motorized faders, replacement fader for the vs2400cd? [Re: gyorpb]
Spargo Offline
StrayDog
Planeteer


Registered: 02/20/04
Posts: 1189
Loc: Smoky Mountain Foothills
https://www.youtube.com/watch?v=Y2VOpC4Q1Co&t=150s

You guys seen this? Forgive me if its old news.

Incredible to watch..........

(Just checked and it does not start at the edge....
you'll have to rewind..... I never was good at this....)


Edited by Spargo (08/15/21 10:32 PM)

Top
#1745721 - 08/16/21 06:09 AM Re: behringer motorized faders, replacement fader for the vs2400cd? [Re: Spargo]
gyorpb Offline
Planeteer


Registered: 05/11/19
Posts: 298
Well, yes. But… that is a little bit more involved than a straight up component swap…
Top
#1745757 - 08/16/21 01:23 PM Re: behringer motorized faders, replacement fader for the vs2400cd? [Re: gyorpb]
Eejit Offline
Planeteer


Registered: 09/25/20
Posts: 193
Loc: Irish Republic
It's certainly impressive, and very inspiring.
However, for the moment, I think I'll stick to changing the onboard battery!

Top
Page 1 of 1 1


Hop to:
Forum Stats
21372 Members
26 Forums
160880 Topics
1866153 Posts

Max Online: 386 @ 01/18/23 04:57 AM
Newest Members
raultv, Bgdlive59, AncientJuan, jairo santos, drshum
21372 Registered Users

Generated in 0.015 seconds in which 0.003 seconds were spent on a total of 13 queries. Zlib compression disabled.