Page 1 of 1 1
Topic Options
#1748762 - 09/05/21 12:10 AM Using the VSR in Rack Recorder mode
Kein Kochendes Offline
Space Cadet

Registered: 09/04/21
Posts: 1

Ive been wanting a VSR880 for a while so I could record tracks and then mix each recorded track with an analog mixer. Ive been slowly trying to understand how it works.

Ive set it to EZroutiong Rack recorder mode, which I believe sets the direct out option to ON. Is there a way to see the levels of the incoming signal when recording(red), then see the levels of the recorded track when playing back(green)? Right now I can play back the recorded tracks, but only see levels on the L & R meters.

Im trying to set it so it behaves as similar as possible to an 8 track tape recorder.


Edited by Kein Kochendes (09/05/21 12:42 AM)

#1775722 - 02/23/22 04:45 PM Re: Using the VSR in Rack Recorder mode [Re: Kein Kochendes]
fishheads Offline
Space Cadet

Registered: 08/15/17
Posts: 20
If you're using like an 8 track tape recorder, I'm not sure why you would want to monitor inputs simultaneously with outputs? I mean you aren't going to be recording and mixing at the same time right?

Generally I will record all the tracks with Direct Out set to "off", then when ready for mixdown, set Direct out to "on" and send those tracks to my 8-channel mixer to mix down to one stereo track.

Page 1 of 1 1

Hop to:
Shout Box

Newest Members
Martin Nohava, nadir, joseph9591, ARP70, Furry
21359 Registered Users

Generated in 0.013 seconds in which 0.003 seconds were spent on a total of 13 queries. Zlib compression disabled.