|
When bouncing tracks you're in EZ ROUTING view.
There's a "FX" block in lower right corner (?) I use VGA screen, so I'm guessing here ...
Click on the number / channel return that contains the effect
you want to bounce and turn the JogWheel and move the virtual cable
to the channel in the "TRACK MIX" block to witch you bounce the "dry"
track. That track should be armed for recording of course ...
Adjust the FX return fader and the dry track fader to get the right balance
of the two and do a "test recording" : )
I think you have to "pair" 2 Rec. channels if you want stereo FX recorded ....
( This is from memory only, I'm not at my VS's right now, so I might have
missed something in the "description" ) : /
Cheers!
| 
imply depressed 
