You are not logged in. [Log In] VS-Planet » Forums » Roland VS DAWs and Hardware » VS-2480 - Dedicated to Frank Griffith » RBus output question
Register       Forum List       Calendar       FAQ
Page 1 of 1 1
Topic Options
#1603444 - 02/26/19 07:18 PM RBus output question
Canefire_ian Offline
Planeteer


Registered: 10/23/18
Posts: 51
Hi All,
Can someone explain how to send 8 tracks of audio out through one of the RBUS connections?

Thus far I have only recorded audio from an external source into my VS 2480 through the RBUS port. I used Bear's adat to rbus converter.

I should be able to do the reverse.
OUT of the VS2480 RBUS port
IN Bear's RBUS to ADAT converter
OUT the ADAT end of Bear's RBUS to ADAT converter
IN to 8 channel ADAT port of a device (X)
OUT of device (X) to a laptop or desktop

What device (X) should I be considering in 2018?

Is there a proven device that is ADAT input to USB or Firewire that someone here uses?

I just don't want to do 2 track recording out. I want a way to record 8 tracks digitally at once from the VS2480. This will minimize time considerably.

I almost purchased a vfire but think it may be too complicated. Just want to get the WAVs to people quickly. I do not mind using REAPER.

Thanks,
Ian
In
Top
#1603458 - 02/26/19 10:23 PM Re: RBus output question [Re: Canefire_ian]
Kees Offline
Space Cadet


Registered: 11/09/13
Posts: 25
Go to Ez routing, select page "output" and connect via aux/dir busses your Rbus out.
Or google ez routing vs2480 and select pictures to look for some examples.
Good luck :-)
Top
#1603490 - 02/27/19 10:09 AM Re: RBus output question [Re: Kees]
ricco Offline
Planeteer


Registered: 01/12/16
Posts: 140
Loc: Victoria BC, Canada
I'm doing it exactly as Kees describes, except I have two RPC-1 cards so 2 RBUS in/outs from my VS-2480 to my computer. I run it into REAPER. I only just started doing this, as it took a bit of fruitful hunting around the Planet members to get a 64bit driver for the M Audio (thanks again BmC).
SO on the OUTPUT ASSIGN (upper right) part of EZ ROUTING, I have RBUS 1 outs 1-8 connected to 1/2, 3/4,,,to 7/8...then RBUS 2 outs 1-8 connected to DIR 1/2....to 7/8.
That's it.
I've also connected the RBUS 1+2 in the PATCH BAY (upper left). ,,,using tracks 9-24 connected 1-8 on each RBUS. Make sure you click the SELECT coloured buttons to correspond with the RBUS input tracks. I leave the COAX and OPT IN unconnected.
cheers
Top
#1603510 - 02/27/19 04:25 PM Re: RBus output question [Re: ricco]
Canefire_ian Offline
Planeteer


Registered: 10/23/18
Posts: 51
@ Ricco, thanks for the info. Regarding your rpc-1, does that PCI card fit in modern desptops or have you had to keep it in an older model computer?

@Kees thanks for the input.

Has anyone on the planet tried to use this product for modern ADAT connection MiniDSP USBStreamer B

https://www.minidsp.com/products/usb-audio-interface/usbstreamer-box
Top
#1603651 - 02/28/19 06:44 AM Re: RBus output question [Re: Canefire_ian]
ricco Offline
Planeteer


Registered: 01/12/16
Posts: 140
Loc: Victoria BC, Canada
Hi Cane_fire Ian: I don't know the answer to your question....re: if the RPC-1will fit in newer computers.
The computer I'm using the cards in is 9 years old, and running Win 7 Pro 64bit with 8GB ram and Intel Core 2 Duo at
3.00GHz with 200GB HD.
Seems to do the job for what I'm asking of it. I have the latest REAPER install. But I'm still very much a rookie with it.
Cheers
Rick (ricco)
Top
#1603664 - 02/28/19 01:00 PM Re: RBus output question [Re: ricco]
dkfackler Offline
Planeteer


Registered: 04/24/06
Posts: 713
Loc: Coventry, OH, planet Thulcandr...
The RPC-1 won't fit PCIe equipped machines.

dk
Top
#1603706 - 02/28/19 05:49 PM Re: RBus output question [Re: dkfackler]
Canefire_ian Offline
Planeteer


Registered: 10/23/18
Posts: 51
THanks for the response.
Cheers,
Ian
Top
#1643280 - 02/06/20 10:15 AM Re: RBus output question [Re: Canefire_ian]
aero Offline
Space Cadet


Registered: 10/25/12
Posts: 24
Audient ID 14 is excellent and allows 8ch ADAT. I use it in my small office studio where I mostly write and compose. In my live room I use RME Raydat, capable of 32ch ADAT, it is pricey but also excellent.

Edited by aero (02/06/20 10:18 AM)
Edit Reason: added more info
Top
Page 1 of 1 1


Hop to:
Who's Online
2 registered (jimmyrock, E Beau) and 65 anonymous users online.
details
Top Posters
76241
AL
56436
Ismellelephant
55446
Jazzooo
43456
Timster
40001
Silversmith
37329
Mooseboy
36756
C Jo Go
33129
Popmann
32942
Tom Mix
31916
moontan
31490
gonzo
29850
flatcat
28814
NOK
27538
Memphis Monroe
26869
Doughboy
26582
Marty Gilman
24489
fabulousthunderbird
24318
RGR
23691
paulb
21604
Vanillagrits
21125
fonts
21095
MadGuitrst
20169
ulank
19628
glensimonds
19598
vvvm
19469
String Jammer
19193
Xenophile
19084
Dave Morris
18923
T57Strat
18911
slotz
18894
GAMBLE
18791
Jammer
18693
Liquidirt
18405
SteveW
18011
JazAddict
17881
motown59
17600
GAWZDigitalUnderground
17522
Geo
17326
Hano
Forum Stats
21370 Members
26 Forums
160066 Topics
1853815 Posts

Max Online: 386 @ 01/18/23 04:57 AM
Newest Members
AncientJuan, jairo santos, drshum, Selfish, VSDeadHead77
21370 Registered Users
My Cookies · Mark all read Powered by UBB.threads™ Contact Us · VS-Planet · Top

Generated in 0.014 seconds in which 0.002 seconds were spent on a total of 13 queries. Zlib compression disabled.